| Your One-Stop Source for Lifepak 12 Defibrillator, Pads, Batteries & all AED Accessorie...Click | ||||||
|
30 Day
Unconditional Money Back Guarantee | ||||||
| . | ||||||
|
Home |
LIFEPAK 12 Defibrillator |
LIFEPAK 12 Accessories | LIFEPAK 12
Power
Options |
LIFEPAK 12
Batteries |
LIFEPAK 12
Electrodes |
Contact Us
... |
||||||
|
....... .....
Emergency Oxygen
|
Resuscitators
|
Pocket Cpr Units
|
PO/GSA
Bids
|
View
Shopping Cart
... |
||||||
|
About the LIFEPAK 12 Batteries Power Options:
Medtronic Physio-Control has introduced new, rechargeable Lithium-ion
batteries for the LIFEPAK 12 and the REDI-CHARGE battery charger,
supporting both the LIFEPAK 12 and 15 devices. The new batteries offer
up to 12 hours of monitoring on two batteries and require no
conditioning or calibration. If
you’re part of an EMS or hospital team, you know how much can happen in
the course of a shift. With a Li-ion battery for the LIFEPAK 12
defibrillator/monitor and the REDI-CHARGE battery charger, the power
you need will be there — up to 12 hours of monitoring time* — every time
you need it. |
||||||
|
LIFEPAK
12 Defibrillator/Monitor Power Options |
||||||
|
|
|
REDI-CHARGE
Adapter ▼  REDI-CHARGE Adapter Tray Adapter tray for use with LIFEPAK 12 Li-ion batteries and REDI-CHARGE Base. Batteries and Base sold separately 11141-000116 |
|
|||
|
|
|
|
Physio-Control
LIFEPAK 12
Defibrillator/ Monitor12-Volt DC Cable for MBSS Charger |
|||
|
|
|
|
11210-000002 |
|||
|
|
|
|
|
|||
|
Powerful: Quality and Safety are Designed In: We began with a cell technology specifically designed and approved for medical devices. Vital safety features such as over-voltage and over temperature protection circuitry were then incorporated, creating the foundation for a high-quality, reliable battery. The final product was subject to extensive testing with iterations of 1-meter drop testing; 0° to 50° C temperature soak testing; and hundreds of batteries being subjected to destructive testing. Our commitment to quality doesn’t end there however, with continuous process monitoring in place for ongoing quality assurance. The result of all of this effort is a high quality, high-performance battery that you can be confident will provide the power you need, when you need it. Confidence in LIFEPAK 12 Products: Unlike some third party batteries, all of our batteries are tested and validated with LIFEPAK devices by Physio-Control and are UL recognized. Remember, Physio-Control can not confirm the reliability, safety or effectiveness of any third party battery for use with LIFEPAK 12 lifesaving devices. Unrivaled Performance: A pair of Li-ion batteries for the 12 is not only powerful enough to last an entire shift** without the need for a recharge, they are also simple to maintain with no conditioning needed. At the end of the shift, the REDI-CHARGE battery charger will give you a rapid turnaround, returning your batteries to full capacity in just over 4 hours. And finally, with an IP44 rating for solid and liquid ingress, these batteries are our most durable yet for the 12. If you’re part of an EMS or hospital team, you know how much can happen in the course of a shift. With a Li-ion battery for the LIFEPAK 12 defibrillator/monitor and the REDI-CHARGE battery charger, the power you need will be there — up to 12 hours of monitoring time* — every time you need it. * Actual run times may vary depending on device configurations, environmental conditions and monitoring parameters used. **Based on a 12 hour shift.
Replacing and Removing Electrodes:
Replace QUIK-COMBO electrodes after 50 defibrillation shocks or 24
hours on the patient’s skin or 8 hours of continuous pacing.
To remove QUIK-COMBO or FAST-PATCH electrodes from the patient: 1
Slowly peel back the electrode from the edge, supporting the skin.
Removing
Therapy Electrodes from Skin
2 Clean and dry
the patient’s skin. 3 When replacing electrodes, adjust the
electrode positions slightly to help prevent skin burns. 4 Close the
protective cover on the QUIK-COMBO therapy cable connector when the
cable is not in use. In addition, disconnect the defibrillation
cable from the FAST-PATCH electrodes. 1 Press down around the
electrode post. 2 Pinch the snap connector with the fingers of the
other hand and pull straight up.
Confidence in
Physio-Control LIFEPAK 12 Products |
||||||
|
AED
Professionals™
|
||||||
